---
name: MantelMount control via Bond RF bridge
description: How the MantelMount is controlled in HA — Bond RF entities, contact sensor mapping, command sequence
type: reference
---

MantelMount is controlled via a Bond RF bridge. No native HA integration — uses assumed_state entities.

**Entities:**
- `light.mm_down_up` — "Run Button" — toggle starts/stops the motor
- `fan.mm_run` — direction control. ON = down, OFF = up
- `binary_sensor.tv_mount_angle_contact` — Zigbee door/tilt sensor. ON = mount down/extended, OFF = mount up/retracted

**Command sequence:** Toggle run button FIRST, then set direction 1s later. This is how the MM controller works — run first, then direction.

**Automation** (`automation.mantelmount_up_down`):
- Triggers on Samsung TV on/off
- TV-off condition: `switch.tv_power` (Zigbee power strip L4) must be on
- Uses contact sensor as guard (skip if already in correct position) and for retry verification after 20s

**How to apply:** When modifying mantel mount automation, always preserve run-then-direction sequence and contact sensor verification.