AvianVisitors/scripts/birdnet-pi-config

#!/bin/sh
# Altered from raspi-config tool below
# https://github.com/RPi-Distro/birdnetpi-config
#
# See LICENSE file for copyright and license details
# Copyright (c) 2012 Alex Bradbury <asb@asbradbury.org>

my_dir=$(realpath $(dirname $0))
INTERACTIVE=True
ASK_TO_REBOOT=0
BLACKLIST=/etc/modprobe.d/raspi-blacklist.conf
CONFIG=/boot/config.txt

USER=${SUDO_USER:-$(who -m | awk '{ print $1 }')}

is_pi () {
  ARCH=$(dpkg --print-architecture)
  if [ "$ARCH" = "armhf" ] || [ "$ARCH" = "arm64" ] ; then
    return 0
  else
    return 1
  fi
}

if is_pi ; then
  CMDLINE=/boot/cmdline.txt
else
  CMDLINE=/proc/cmdline
fi

is_pione() {
   if grep -q "^Revision\s*:\s*00[0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo; then
      return 0
   elif grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[0-36][0-9a-fA-F]$" /proc/cpuinfo ; then
      return 0
   else
      return 1
   fi
}

is_pitwo() {
   grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]04[0-9a-fA-F]$" /proc/cpuinfo
   return $?
}

is_pizero() {
   grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[9cC][0-9a-fA-F]$" /proc/cpuinfo
   return $?
}

is_pifour() {
   grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F]3[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo
   return $?
}

get_pi_type() {
   if is_pione; then
      echo 1
   elif is_pitwo; then
      echo 2
   else
      echo 0
   fi
}

is_live() {
    grep -q "boot=live" $CMDLINE
    return $?
}

is_ssh() {
  if pstree -p | egrep --quiet --extended-regexp ".*sshd.*\($$\)"; then
    return 0
  else
    return 1
  fi
}

is_fkms() {
  if grep -s -q okay /proc/device-tree/soc/v3d@7ec00000/status \
                     /proc/device-tree/soc/firmwarekms@7e600000/status \
                     /proc/device-tree/v3dbus/v3d@7ec04000/status; then
    return 0
  else
    return 1
  fi
}

is_pulseaudio() {
  PS=$(ps ax)
  echo "$PS" | grep -q pulseaudio
  return $?
}

has_analog() {
  if [ $(get_leds) -eq -1 ] ; then
    return 0
  else
    return 1
  fi
}

is_installed() {
    if [ "$(dpkg -l "$1" 2> /dev/null | tail -n 1 | cut -d ' ' -f 1)" != "ii" ]; then
      return 1
    else
      return 0
    fi
}

deb_ver () {
  ver=`cat /etc/debian_version | cut -d . -f 1`
  echo $ver
}

calc_wt_size() {
  # NOTE: it's tempting to redirect stderr to /dev/null, so supress error 
  # output from tput. However in this case, tput detects neither stdout or 
  # stderr is a tty and so only gives default 80, 24 values
  WT_HEIGHT=18
  WT_WIDTH=$(tput cols)

  if [ -z "$WT_WIDTH" ] || [ "$WT_WIDTH" -lt 60 ]; then
    WT_WIDTH=80
  fi
  if [ "$WT_WIDTH" -gt 178 ]; then
    WT_WIDTH=120
  fi
  WT_MENU_HEIGHT=$(($WT_HEIGHT-7))
}

set_config_var() {
  lua - "$1" "$2" "$3" <<EOF > "$3.bak"
local key=assert(arg[1])
local value=assert(arg[2])
local fn=assert(arg[3])
local file=assert(io.open(fn))
local made_change=false
for line in file:lines() do
  if line:match("^#?%s*"..key.."=.*$") then
    line=key.."="..value
    made_change=true
  end
  print(line)
end

if not made_change then
  print(key.."="..value)
end
EOF
mv "$3.bak" "$3"
}

clear_config_var() {
  lua - "$1" "$2" <<EOF > "$2.bak"
local key=assert(arg[1])
local fn=assert(arg[2])
local file=assert(io.open(fn))
for line in file:lines() do
  if line:match("^%s*"..key.."=.*$") then
    line="#"..line
  end
  print(line)
end
EOF
mv "$2.bak" "$2"
}

get_config_var() {
  lua - "$1" "$2" <<EOF
local key=assert(arg[1])
local fn=assert(arg[2])
local file=assert(io.open(fn))
local found=false
for line in file:lines() do
  local val = line:match("^%s*"..key.."=(.*)$")
  if (val ~= nil) then
    print(val)
    found=true
    break
  end
end
if not found then
   print(0)
end
EOF
}

is_number() {
  case $1 in
    ''|*[!0-9]*) return 0 ;;
    *) return 1 ;;
  esac
}

do_change_pass() {
  whiptail --msgbox "You will now be asked to enter a new password for the $USER user" 20 60 1
  passwd $USER &&
  whiptail --msgbox "Password changed successfully" 20 60 1
}

do_configure_keyboard() {
  printf "Reloading keymap. This may take a short while\n"
  if [ "$INTERACTIVE" = True ]; then
    dpkg-reconfigure keyboard-configuration
  else
    local KEYMAP="$1"
    sed -i /etc/default/keyboard -e "s/^XKBLAYOUT.*/XKBLAYOUT=\"$KEYMAP\"/"
    dpkg-reconfigure -f noninteractive keyboard-configuration
  fi
  invoke-rc.d keyboard-setup start
  setsid sh -c 'exec setupcon -k --force <> /dev/tty1 >&0 2>&1'
  udevadm trigger --subsystem-match=input --action=change
  return 0
}

do_change_locale() {
  if [ "$INTERACTIVE" = True ]; then
    dpkg-reconfigure locales
  else
    local LOCALE="$1"
    if ! LOCALE_LINE="$(grep "^$LOCALE " /usr/share/i18n/SUPPORTED)"; then
      return 1
    fi
    local ENCODING="$(echo $LOCALE_LINE | cut -f2 -d " ")"
    echo "$LOCALE $ENCODING" > /etc/locale.gen
    sed -i "s/^\s*LANG=\S*/LANG=$LOCALE/" /etc/default/locale
    dpkg-reconfigure -f noninteractive locales
  fi
}

do_change_timezone() {
  if [ "$INTERACTIVE" = True ]; then
    dpkg-reconfigure tzdata
  else
    local TIMEZONE="$1"
    if [ ! -f "/usr/share/zoneinfo/$TIMEZONE" ]; then
      return 1;
    fi
    rm /etc/localtime
    echo "$TIMEZONE" > /etc/timezone
    dpkg-reconfigure -f noninteractive tzdata
  fi
}

get_wifi_country() {
  CODE=${1:-0}
  IFACE="$(list_wlan_interfaces | head -n 1)"
  if [ -z "$IFACE" ]; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "No wireless interface found" 20 60
    fi
    return 1
  fi
  if ! wpa_cli -i "$IFACE" status > /dev/null 2>&1; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "Could not communicate with wpa_supplicant" 20 60
    fi
    return 1
  fi
  wpa_cli -i "$IFACE" save_config > /dev/null 2>&1
  COUNTRY="$(wpa_cli -i "$IFACE" get country)"
  if [ "$COUNTRY" = "FAIL" ]; then
    return 1
  fi
  if [ $CODE = 0 ]; then
    echo "$COUNTRY"
  fi
  return 0
}

do_wifi_country() {
  IFACE="$(list_wlan_interfaces | head -n 1)"
  if [ -z "$IFACE" ]; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "No wireless interface found" 20 60
    fi
    return 1
  fi

  if ! wpa_cli -i "$IFACE" status > /dev/null 2>&1; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "Could not communicate with wpa_supplicant" 20 60
    fi
    return 1
  fi

  oIFS="$IFS"
  if [ "$INTERACTIVE" = True ]; then
    value=$(cat /usr/share/zoneinfo/iso3166.tab | tail -n +26 | tr '\t' '/' | tr '\n' '/')
    IFS="/"
    COUNTRY=$(whiptail --menu "Select the country in which the Pi is to be used" 20 60 10 ${value} 3>&1 1>&2 2>&3)
  else
    COUNTRY=$1
    true
  fi
  if [ $? -eq 0 ];then
    wpa_cli -i "$IFACE" set country "$COUNTRY"
    wpa_cli -i "$IFACE" save_config > /dev/null 2>&1
    if iw reg set "$COUNTRY" 2> /dev/null; then
        ASK_TO_REBOOT=1
    fi
    if hash rfkill 2> /dev/null; then
      rfkill unblock wifi
      if is_pi ; then
        for filename in /var/lib/systemd/rfkill/*:wlan ; do
          echo 0 > $filename
        done
      fi
    fi
    if [ "$INTERACTIVE" = True ]; then
        whiptail --msgbox "Wireless LAN country set to $COUNTRY" 20 60 1
    fi
  fi
  IFS=$oIFS
}

get_ssh() {
  if service ssh status | grep -q inactive; then
    echo 1
  else
    echo 0
  fi
}

do_ssh() {
  if [ -e /var/log/regen_ssh_keys.log ] && ! grep -q "^finished" /var/log/regen_ssh_keys.log; then
    whiptail --msgbox "Initial ssh key generation still running. Please wait and try again." 20 60 2
    return 1
  fi
  DEFAULT=--defaultno
  if [ $(get_ssh) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno \
      "Would you like the SSH server to be enabled?\n\nCaution: Default and weak passwords are a security risk when SSH is enabled!" \
      $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    ssh-keygen -A &&
    update-rc.d ssh enable &&
    invoke-rc.d ssh start &&
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    update-rc.d ssh disable &&
    invoke-rc.d ssh stop &&
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The SSH server is $STATUS" 20 60 1
  fi
}

get_vnc() {
  if systemctl status vncserver-x11-serviced.service  | grep -q -w active; then
    echo 0
  else
    echo 1
  fi
}

do_vnc() {
  DEFAULT=--defaultno
  if [ $(get_vnc) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the VNC Server to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    if is_installed realvnc-vnc-server || apt-get install realvnc-vnc-server; then
      systemctl enable vncserver-x11-serviced.service &&
      systemctl start vncserver-x11-serviced.service &&
      STATUS=enabled
    else
      return 1
    fi
  elif [ $RET -eq 1 ]; then
    if is_installed realvnc-vnc-server; then
        systemctl disable vncserver-x11-serviced.service
        systemctl stop vncserver-x11-serviced.service
    fi
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The VNC Server is $STATUS" 20 60 1
  fi
}

disable_raspi_config_at_boot() {
  if [ -e /etc/profile.d/birdnetpi-config.sh ]; then
    rm -f /etc/profile.d/birdnetpi-config.sh
    if [ -e /etc/systemd/system/getty@tty1.service.d/birdnetpi-config-override.conf ]; then
      rm /etc/systemd/system/getty@tty1.service.d/birdnetpi-config-override.conf
    fi
    telinit q
  fi
}

get_boot_cli() {
  if systemctl get-default | grep -q multi-user ; then
    echo 0
  else
    echo 1
  fi
}

get_autologin() {
  if [ $(get_boot_cli) -eq 0 ]; then
    # booting to CLI
    # stretch or buster - is there an autologin conf file?
    if [ -e /etc/systemd/system/getty@tty1.service.d/autologin.conf ] ; then
      echo 0
    else
      # stretch or earlier - check the getty service symlink for autologin
      if [ $(deb_ver) -le 9 ] && grep -q autologin /etc/systemd/system/getty.target.wants/getty@tty1.service ; then
        echo 0
      else
        echo 1
      fi
    fi
  else
    # booting to desktop - check the autologin for lightdm
    if grep -q "^autologin-user=" /etc/lightdm/lightdm.conf ; then
      echo 0
    else
      echo 1
    fi
  fi
}

do_update() {
  apt-get update &&
  apt-get install birdnetpi-config &&
  printf "Sleeping 5 seconds before reloading birdnetpi-config\n" &&
  sleep 5 &&
  exec birdnetpi-config
}

do_audio() {
  if is_pulseaudio ; then
    oIFS="$IFS"
    if [ "$INTERACTIVE" = True ]; then
      list=$(sudo -u $SUDO_USER XDG_RUNTIME_DIR=/run/user/$SUDO_UID pacmd list-sinks | grep -e index -e alsa.name | sed s/*//g | sed s/^[' '\\t]*//g | sed s/'index: '//g | sed s/'alsa.name = '//g | sed s/'bcm2835 '//g | sed s/\"//g | tr '\n' '/')
      if ! [ -z "$list" ] ; then
        IFS="/"
        AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 ${list} 3>&1 1>&2 2>&3)
      else
        whiptail --msgbox "No internal audio devices found" 20 60 1
        return 1
      fi
    else
      AUDIO_OUT=$1
      true
    fi
    if [ $? -eq 0 ]; then
      sudo -u $SUDO_USER XDG_RUNTIME_DIR=/run/user/$SUDO_UID pactl set-default-sink $AUDIO_OUT
    fi
    IFS=$oIFS
  else
    if aplay -l | grep -q "bcm2835 ALSA"; then
      if [ "$INTERACTIVE" = True ]; then
        AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \
          "0" "Auto" \
          "1" "Force 3.5mm ('headphone') jack" \
          "2" "Force HDMI" \
          3>&1 1>&2 2>&3)
      else
        AUDIO_OUT=$1
      fi
      if [ $? -eq 0 ]; then
        amixer cset numid=3 "$AUDIO_OUT"
      fi
    else
      ASPATH=$(getent passwd $USER | cut -d : -f 6)/.asoundrc
      if [ "$INTERACTIVE" = True ]; then
        CARD0=$(LC_ALL=C aplay -l | grep bcm2835 | grep "card 0" | cut -d [ -f 3 | cut -d ] -f 1 | cut -d ' ' -f 2-)
        CARD1=$(LC_ALL=C aplay -l | grep bcm2835 | grep "card 1" | cut -d [ -f 3 | cut -d ] -f 1 | cut -d ' ' -f 2-)
        CARD2=$(LC_ALL=C aplay -l | grep bcm2835 | grep "card 2" | cut -d [ -f 3 | cut -d ] -f 1 | cut -d ' ' -f 2-)
        if ! [ -z "$CARD2" ]; then
          AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \
            "0" "$CARD0" \
            "1" "$CARD1" \
            "2" "$CARD2" \
            3>&1 1>&2 2>&3)
        elif ! [ -z "$CARD1" ]; then
          AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \
            "0" "$CARD0" \
            "1" "$CARD1" \
            3>&1 1>&2 2>&3)
        elif ! [ -z "$CARD0" ]; then
          AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \
            "0" "$CARD0" \
            3>&1 1>&2 2>&3)
        else
          whiptail --msgbox "No internal audio devices found" 20 60 1
          false
        fi
      else
        AUDIO_OUT=$1
      fi
      if [ $? -eq 0 ]; then
        cat << EOF > $ASPATH
pcm.!default {
  type asym
  playback.pcm {
    type plug
    slave.pcm "output"
  }
  capture.pcm {
    type plug
    slave.pcm "input"
  }
}

pcm.output {
  type hw
  card $AUDIO_OUT
}

ctl.!default {
  type hw
  card $AUDIO_OUT
}
EOF
      fi
    fi
  fi
}

do_resolution() {
  if [ "$INTERACTIVE" = True ]; then
    CMODE=$(get_config_var hdmi_mode $CONFIG)
    CGROUP=$(get_config_var hdmi_group $CONFIG)
    if [ $CMODE -eq 0 ] ; then
      CSET="Default"
    elif [ $CGROUP -eq 2 ] ; then
      CSET="DMT Mode "$CMODE
    else
      CSET="CEA Mode "$CMODE
    fi
    oIFS="$IFS"
    IFS="/"
    if tvservice -d /dev/null | grep -q Nothing ; then
      value="Default/720x480/DMT Mode 4/640x480 60Hz 4:3/DMT Mode 9/800x600 60Hz 4:3/DMT Mode 16/1024x768 60Hz 4:3/DMT Mode 85/1280x720 60Hz 16:9/DMT Mode 35/1280x1024 60Hz 5:4/DMT Mode 51/1600x1200 60Hz 4:3/DMT Mode 82/1920x1080 60Hz 16:9/"
    else
      value="Default/Monitor preferred resolution/"
      value=$value$(tvservice -m CEA | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/CEA Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/')
      value=$value$(tvservice -m DMT | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/DMT Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/')
    fi
    RES=$(whiptail --default-item $CSET --menu "Choose screen resolution" 20 60 10 ${value} 3>&1 1>&2 2>&3)
    STATUS=$?
    IFS=$oIFS
    if [ $STATUS -eq 0 ] ; then
      GRS=$(echo "$RES" | cut -d ' ' -f 1)
      MODE=$(echo "$RES" | cut -d ' ' -f 3)
      if [ $GRS = "Default" ] ; then
        MODE=0
      elif [ $GRS = "DMT" ] ; then
        GROUP=2
      else
        GROUP=1
      fi
    fi
  else
    GROUP=$1
    MODE=$2
    STATUS=0
  fi
  if [ $STATUS -eq 0 ]; then
    if [ $MODE -eq 0 ]; then
      clear_config_var hdmi_force_hotplug $CONFIG
      clear_config_var hdmi_group $CONFIG
      clear_config_var hdmi_mode $CONFIG
    else
      set_config_var hdmi_force_hotplug 1 $CONFIG
      set_config_var hdmi_group $GROUP $CONFIG
      set_config_var hdmi_mode $MODE $CONFIG
    fi
    if [ "$INTERACTIVE" = True ]; then
      if [ $MODE -eq 0 ] ; then
        whiptail --msgbox "The resolution is set to default" 20 60 1
      else
        whiptail --msgbox "The resolution is set to $GRS mode $MODE" 20 60 1
      fi
    fi
    if [ $MODE -eq 0 ] ; then
      TSET="Default"
    elif [ $GROUP -eq 2 ] ; then
      TSET="DMT Mode "$MODE
    else
      TSET="CEA Mode "$MODE
    fi
    if [ "$TSET" != "$CSET" ] ; then
      ASK_TO_REBOOT=1
    fi
  fi
}

list_wlan_interfaces() {
  for dir in /sys/class/net/*/wireless; do
    if [ -d "$dir" ]; then
      basename "$(dirname "$dir")"
    fi
  done
}

do_wifi_ssid_passphrase() {
  RET=0
  IFACE_LIST="$(list_wlan_interfaces)"
  IFACE="$(echo "$IFACE_LIST" | head -n 1)"

  if [ -z "$IFACE" ]; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "No wireless interface found" 20 60
    fi
    return 1
  fi

  if ! wpa_cli -i "$IFACE" status > /dev/null 2>&1; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "Could not communicate with wpa_supplicant" 20 60
    fi
    return 1
  fi

  if [ "$INTERACTIVE" = True ] && [ -z "$(get_wifi_country)" ]; then
    do_wifi_country
  fi

  SSID="$1"
  while [ -z "$SSID" ] && [ "$INTERACTIVE" = True ]; do
    SSID=$(whiptail --inputbox "Please enter SSID" 20 60 3>&1 1>&2 2>&3)
    if [ $? -ne 0 ]; then
      return 0
    elif [ -z "$SSID" ]; then
      whiptail --msgbox "SSID cannot be empty. Please try again." 20 60
    fi
  done

  PASSPHRASE="$2"
  while [ "$INTERACTIVE" = True ]; do
    PASSPHRASE=$(whiptail --passwordbox "Please enter passphrase. Leave it empty if none." 20 60 3>&1 1>&2 2>&3)
    if [ $? -ne 0 ]; then
      return 0
    else
      break
    fi
  done

  # Escape special characters for embedding in regex below
  local ssid="$(echo "$SSID" \
   | sed 's;\\;\\\\;g' \
   | sed -e 's;\.;\\\.;g' \
         -e 's;\*;\\\*;g' \
         -e 's;\+;\\\+;g' \
         -e 's;\?;\\\?;g' \
         -e 's;\^;\\\^;g' \
         -e 's;\$;\\\$;g' \
         -e 's;\/;\\\/;g' \
         -e 's;\[;\\\[;g' \
         -e 's;\];\\\];g' \
         -e 's;{;\\{;g'   \
         -e 's;};\\};g'   \
         -e 's;(;\\(;g'   \
         -e 's;);\\);g'   \
         -e 's;";\\\\\";g')"

  wpa_cli -i "$IFACE" list_networks \
   | tail -n +2 | cut -f -2 | grep -P "\t$ssid$" | cut -f1 \
   | while read ID; do
    wpa_cli -i "$IFACE" remove_network "$ID" > /dev/null 2>&1
  done

  ID="$(wpa_cli -i "$IFACE" add_network)"
  wpa_cli -i "$IFACE" set_network "$ID" ssid "\"$SSID\"" 2>&1 | grep -q "OK"
  RET=$((RET + $?))

  if [ -z "$PASSPHRASE" ]; then
    wpa_cli -i "$IFACE" set_network "$ID" key_mgmt NONE 2>&1 | grep -q "OK"
    RET=$((RET + $?))
  else
    wpa_cli -i "$IFACE" set_network "$ID" psk "\"$PASSPHRASE\"" 2>&1 | grep -q "OK"
    RET=$((RET + $?))
  fi

  if [ $RET -eq 0 ]; then
    wpa_cli -i "$IFACE" enable_network "$ID" > /dev/null 2>&1
  else
    wpa_cli -i "$IFACE" remove_network "$ID" > /dev/null 2>&1
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "Failed to set SSID or passphrase" 20 60
    fi
  fi
  wpa_cli -i "$IFACE" save_config > /dev/null 2>&1

  echo "$IFACE_LIST" | while read IFACE; do
    wpa_cli -i "$IFACE" reconfigure > /dev/null 2>&1
  done

  return $RET
}

do_update() {
  apt update && apt -y full-upgrade
  ASK_TO_REBOOT=1
}

do_install_birdnet() {
  ${my_dir}/Birders_Guide_Installer.sh
  ASK_TO_REBOOT=1
}

do_finish() {
  disable_raspi_config_at_boot
  if [ $ASK_TO_REBOOT -eq 1 ]; then
    whiptail --yesno "Would you like to reboot now?" 20 60 2
    if [ $? -eq 0 ]; then # yes
      sync
      reboot
    fi
  fi
  exit 0
}
# Everything else needs to be run as root
if [ $(id -u) -ne 0 ]; then
  printf "Script must be run as root. Try 'sudo birdnetpi-config'\n"
  exit 1
fi

if [ -n "${OPT_MEMORY_SPLIT:-}" ]; then
  set -e # Fail when a command errors
  set_memory_split "${OPT_MEMORY_SPLIT}"
  exit 0
fi

do_system_menu() {
  if is_pi ; then
    FUN=$(whiptail --title "BirdNET-Pi Software Configuration Tool (birdnetpi-config)" --menu "System Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
      "Password" "Change password for the '$USER' user" \
      "Audio" "Select audio device you'd like BirdNET-Pi to use" \
      "Wireless LAN" "Enter SSID and passphrase" \
      3>&1 1>&2 2>&3)
  else
      exit
  fi
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      Password*) do_change_pass ;;
      Audio*) do_audio ;;
      Wireless*) do_wifi_ssid_passphrase ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}

do_display_menu() {
  if is_pi ; then
    FUN=$(whiptail --title "BirdNET-Pi Software Configuration Tool (birdnetpi-config)" --menu "Display Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
      "Resolution" "Set a specific screen resolution" \
      3>&1 1>&2 2>&3)
  else
      exit
  fi
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      Resolution*) do_resolution ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}

do_interface_menu() {
  if is_pi ; then
    FUN=$(whiptail --title "BirdNET-Pi Software Configuration Tool (birdnetpi-config)" --menu "Interfacing Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
      "SSH" "Enable/disable remote command line access using SSH" \
      "VNC" "Enable/disable graphical remote access using RealVNC" \
      3>&1 1>&2 2>&3)
  else
      exit
  fi
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      SSH*) do_ssh ;;
      VNC*) do_vnc ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}

do_internationalisation_menu() {
  FUN=$(whiptail --title "BirdNET-Pi Software Configuration Tool (birdnetpi-config)" --menu "Localisation Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
    "Locale" "Configure language and regional settings" \
    "Timezone" "Configure time zone" \
    "Keyboard" "Set keyboard layout to match your keyboard" \
    "WLAN Country" "Set legal wireless channels for your country" \
    3>&1 1>&2 2>&3)
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      Locale*) do_change_locale ;;
      Time*) do_change_timezone ;;
      Key*) do_configure_keyboard ;;
      WLAN*) do_wifi_country ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}
#
# Interactive use loop
#
if [ "$INTERACTIVE" = True ]; then
  [ -e $CONFIG ] || touch $CONFIG
  calc_wt_size
  while [ "$USER" = "root" ] || [ -z "$USER" ]; do
    if ! USER=$(whiptail --inputbox "birdnetpi-config could not determine the default user.\\n\\nWhat user should these settings apply to?" 20 60 pi 3>&1 1>&2 2>&3); then
      return 0
    fi
  done
  while true; do
    if is_pi ; then
      FUN=$(whiptail --title "BirdNET-Pi Software Configuration Tool (birdnetpi-config)" --backtitle "$(cat /proc/device-tree/model)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \
        "System Options" "Configure system settings" \
        "Display Options" "Configure display settings" \
        "Interface Options" "Configure connections to peripherals" \
        "Localisation Options" "Configure language and regional settings" \
        "Update the OS" "Update the underlying operating system" \
        "Install BirdNET-PI" "Install BirdNET-Pi" \
        3>&1 1>&2 2>&3)
    else
        exit
    fi
    RET=$?
    if [ $RET -eq 1 ]; then
      do_finish
    elif [ $RET -eq 0 ]; then
      case "$FUN" in
        System*) do_system_menu ;;
        Display*) do_display_menu ;;
        Interface*) do_interface_menu ;;
        Localisation*) do_internationalisation_menu ;;
        Update*) do_update;;
        Install*) do_install_birdnet;;
        *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
      esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
    else
      exit 1
    fi
  done
fi