From ba998a2c4fca46affadad7a54acacc2f3473befa Mon Sep 17 00:00:00 2001
From: Patrick McGuire <60325264+mcguirepr89@users.noreply.github.com>
Date: Thu, 17 Feb 2022 17:06:57 -0500
Subject: [PATCH] Update install_config.sh

---
 scripts/install_config.sh | 373 +-------------------------------------
 1 file changed, 2 insertions(+), 371 deletions(-)

diff --git a/scripts/install_config.sh b/scripts/install_config.sh
index a2559e2..7b97994 100755
--- a/scripts/install_config.sh
+++ b/scripts/install_config.sh
@@ -8,387 +8,18 @@ my_dir=$(realpath $(dirname $0))
 birdnetpi_dir=$(realpath $(dirname $my_dir))
 BIRDNET_CONF="$(dirname ${my_dir})/birdnet.conf"
 
-get_RECS_DIR() {
-  read -p "What is the full path to your recordings directory (locally)? " RECS_DIR
-}
-
-get_LATITUDE() {
-  read -p "What is the latitude where the recordings were made? " LATITUDE
-}
-
-get_LONGITUDE() {
-  read -p "What is the longitude where the recordings were made? " LONGITUDE
-}
-
-get_DO_EXTRACTIONS() {
-  while true; do
-    read -n1 -p "Do you want this device to perform the extractions? " DO_EXTRACTIONS
-    echo
-    case $DO_EXTRACTIONS in
-      [Yy] ) break;;
-      [Nn] ) break;;
-      * ) echo "You must answer with Yes or No (y or n)";;
-    esac
-  done
-}
-
-get_DO_RECORDING() {
-  while true; do
-    read -n1 -p "Is this device also doing the recording? " DO_RECORDING
-    echo
-    case $DO_RECORDING in
-      [Yy] ) break;;
-      [Nn] ) break;;
-      * ) echo "You must answer with Yes or No (y or n)";;
-    esac
-  done
-}
-
-get_BIRDNETPI_URL() {
-  while true;do
-    read -n1 -p "Would you like to access the extractions via a web browser?
-
-    *Note: It is recommended, (but not required), that you run the web
-    server on the same host that does the extractions. If the extraction
-    service and web server are on different hosts, the \"By_Species\" and
-    \"Processed\" symbolic links won't work. The \"By-Date\" extractions,
-    however, will work as expected." CADDY_SERVICE
-    echo
-    case $CADDY_SERVICE in
-      [Yy] ) read -p "What URL would you like to publish the extractions to?
-        *Note: Set this to http://localhost if you do not want to make the
-        extractions publically available: " BIRDNETPI_URL
-        get_CADDY_PWD
-        get_ICE_PWD
-        break;;
-      [Nn] ) BIRDNETPI_URL= CADDY_PWD= ICE_PWD=;break;;
-      * ) echo "Please answer Yes or No";;
-    esac
-  done
-}
-
-get_CADDY_PWD() {
-  if [ -z ${CADDY_PWD} ]; then
-    while true; do
-      read -p "Please set a password to protect your data: " CADDY_PWD
-      case $CADDY_PWD in
-        "" ) echo "The password cannot be empty. Please try again.";;
-        * ) break;;
-      esac
-    done
-  fi
-}
-
-get_ICE_PWD() {
-  if [ ! -z ${CADDY_PWD} ] && [[ ${DO_RECORDING} =~ [Yy] ]];then
-    while true; do
-      read -n1 -p "Would you like to enable the live audio streaming service?" LIVE_STREAM
-      echo
-      case $LIVE_STREAM in
-        [Yy] )
-          read -p "Please set the icecast password. Use only alphanumeric characters." ICE_PWD
-          echo
-          case ${ICE_PWD} in
-            "" ) echo "The password cannot be empty. Please try again.";;
-            *) break;;
-          esac
-          break;;
-        [Nn] ) break;;
-        * ) echo "You must answer Yes or No (y or n).";;
-      esac
-    done
-  fi
-}
-
-get_DB_PWDS() {
-  if [ ! -z ${DB_PWD} ];then
-    read -p "Please set a password for your database: " DB_PWD
-    echo
-  fi
-}
-
-get_PUSHED() {
-  while true; do
-    read -n1 -p "Do you have a free App key to receive mobile notifications via Pushed.co?" YN
-    echo
-    case $YN in
-      [Yy] ) read -p "Enter your Pushed.co App Key: " PUSHED_APP_KEY
-        read -p "Enter your Pushed.co App Key Secret: " PUSHED_APP_SECRET
-        break;;
-      [Nn] ) PUSHED_APP_KEY=
-        PUSHED_APP_SECRET=
-        break;;
-      * ) echo "A simple Yea or Nay will do";;
-    esac
-  done
-}
-
-get_INSTALL_NOMACHINE() {
-  while true; do
-    read -n1 -p "Would you like to also install NoMachine for remote desktop access?" INSTALL_NOMACHINE
-    echo
-    case $INSTALL_NOMACHINE in
-      [Yy] ) break;;
-      [Nn] ) break;;
-      * ) echo "You must answer with Yes or No (y or n)";;
-    esac
-  done
-}
-
-get_CHANNELS() {
-  REC_CARD="$(sudo -u pi aplay -L \
-    | grep dsnoop \
-    | cut -d, -f1  \
-    | grep -ve 'vc4' -e 'Head' -e 'PCH' \
-    | uniq)"
-    
-  [ -f $(dirname ${my_dir})/soundcard_params.txt ] || touch $(dirname ${my_dir})/soundcard_params.txt
-  SOUND_PARAMS=$(dirname ${my_dir})/soundcard_params.txt
-  SOUND_CARD="$(sudo -u ${USER} aplay -L \
-    | awk -F, '/^hw:/ {print $1}' \
-    | grep -ve 'vc4' -e 'Head' -e 'PCH' \
-    | uniq)"
-  script -c "arecord -D ${SOUND_CARD} --dump-hw-params" -a "${SOUND_PARAMS}" &> /dev/null
-  CHANNELS=$(awk '/CHANN/ { print $2 }' "${SOUND_PARAMS}" | sed 's/\r$//')
-  [ -z REC_CARD ] && REC_CARD=default
-  [ -z CHANNELS ] && CHANNELS=2
-  echo "REC_CARD variable set to ${REC_CARD}"  
-  echo "Number of channels available: ${CHANNELS}"
-}
-
-
-configure() {
-  get_RECS_DIR
-  get_LATITUDE
-  get_LONGITUDE
-  get_DB_PWDS
-  get_DO_EXTRACTIONS
-  get_DO_RECORDING
-  get_BIRDNETPI_URL
-  get_PUSHED
-  get_INSTALL_NOMACHINE
-  get_CHANNELS
-}
-
 install_birdnet_conf() {
   cat << EOF > $(dirname ${my_dir})/birdnet.conf
-################################################################################
-#                    Configuration settings for BirdNET-Pi                     #
-################################################################################
-
-############ CHANGE THE LATITUDE AND LONGITUDE TO STATIC VALUES ################
-
-
-## LATITUDE and LONGITUDE are self-explanatroy. Find them easily at
-## maps.google.com. 
-##  Example: these coordinates would indicate the Eiffel Tower in Paris, France.
-##  LATITUDE=48.858
-##  LONGITUDE=2.294
-
-## These are input as shell substitutions so that this will work out of the box.
-## It guesses your latitude and longitude based off of your network information.
-## THESE SHOULD BE CHANGED TO STATIC NUMBERS!!!!
-LATITUDE=${LATITUDE}
-LONGITUDE=${LONGITUDE}
-
-## RECS_DIR is the location birdnet_analysis.service will look for the data-set
-## it needs to analyze. Be sure this directory is readable and writable for
-## the BIRDNET_USER. If you are going to be accessing a remote data-set, you
-## still need to set this, as this will be where the remote directory gets
-## mounted locally. 
-
-RECS_DIR=${RECS_DIR}
-
-#-----------------------  Web Interface User Password  ------------------------#
-#____________________The variable below sets the 'birdnet'_____________________# 
-#___________________user password for the live audio stream,___________________# 
-#_________________web tools, system info, and processed files__________________#
-
-## CADDY_PWD is the plaintext password (that will be hashed) and used to access
-## certain parts of the web interface
-
-CADDY_PWD=${CADDY_PWD}
-
-#-------------------------  MariaDB User Passwords  ---------------------------#
-#_____________The variable below sets the password for the_____________________# 
-#_______________________'birder' user on the MariaDB___________________________#
-
-## DB_PWD is for the 'birder' user
-DB_PWD=${DB_PWD}
-
-#-------------------------  Live Audio Stream  --------------------------------#
-#_____________The variable below configures/enables the live___________________# 
-#_____________________________audio stream.____________________________________#
-
-
-## ICE_PWD is the password that icecast2 will use to authenticate ffmpeg as a
-## trusted source for the stream. You will never need to enter this manually
-## anywhere other than here.
-
-ICE_PWD=${ICE_PWD}
-
-#-----------------------  Web-hosting/Caddy File-server -----------------------#
-#________The four variables below can be set to enable internet access_________#
-#____________to your data,(e.g., extractions, raw data, live___________________#
-#______________audio stream, BirdNET.selection.txt files)______________________#
-
-
-## BIRDNETPI_URL is the URL where the extractions, data-set, and live-stream
-## will be web-hosted. If you do not own a domain, or would just prefer to keep 
-## the BirdNET-Pi on your local network, keep this EMPTY.
-
-BIRDNETPI_URL=${BIRDNETPI_URL}
-WEBTERMINAL_URL${WEBTERMINAL_URL}
-BIRDNETLOG_URL=${BIRDNETLOG_URL}
-
-
-#-------------------  Mobile Notifications via Pushed.co  ---------------------#
-#____________The two variables below enable mobile notifications_______________#
-#_____________See https://pushed.co/quick-start-guide to get___________________#
-#_________________________these values for your app.___________________________#
-
-#            Keep these EMPTY if haven't setup a Pushed.co App yet.            #
-
-## Pushed.co App Key and App Secret
-
-PUSHED_APP_KEY=${PUSHED_APP_KEY}
-PUSHED_APP_SECRET=${PUSHED_APP_SECRET}
-
-################################################################################
-#--------------------------------  Defaults  ----------------------------------#
-################################################################################
-
-#-------------------------------  NoMachine  ----------------------------------#
-#_____________The variable below can be set include NoMachine__________________#
-#_________________remote desktop software to be installed._____________________#
-
-#            Keep this EMPTY if you do not want to install NoMachine.          #
-
-## INSTALL_NOMACHINE is simply a setting that can be enabled to install
-## NoMachine alongside the BirdNET-Pi for remote desktop access. This in-
-## staller assumes personal use. Please reference the LICENSE file included
-## in this repository for more information.
-## Set this to Y or y to install NoMachine alongside the BirdNET-Lite
-
-INSTALL_NOMACHINE=${INSTALL_NOMACHINE}
-
-#
-#------------------------------ Extraction Service  ---------------------------#
-
-## DO_EXTRACTIONS is simply a setting for enabling the extraction.service.
-## Set this to Y or y to enable extractions.
-
-DO_EXTRACTIONS=${DO_EXTRACTIONS}
-
-#-----------------------------  Recording Service  ----------------------------#
-#____________________The variable below can be set to enable __________________#
-#________________________the birdnet_recording.service ________________________#
-
-## DO_RECORDING is simply a setting for enabling the 24/7
-## birdnet_recording.service.
-## Set this to Y or y to enable recording.
-
-DO_RECORDING=${DO_RECORDING}
-
-## REC_CARD is the sound card you would want the birdnet_recording.service to 
-## use. This setting is irrelevant if you are not planning on doing data 
-## collection via recording on this machine. The command substitution below 
-## looks for a USB microphone's dsnoop alsa device. The dsnoop device lets
-## birdnet_recording.service and livestream.service share the raw audio stream
-## from the microphone. If you would like to use a different microphone than
-## what this produces, or if your microphone does not support creating a
-## dsnoop device, you can set this explicitly from a list of the available
-## devices from the output of running 'aplay -L'
-
-REC_CARD=${REC_CARD}
-
-## PROCESSED is the directory where the formerly 'Analyzed' files are moved 
-## after extractions have been made from them. This includes both WAVE and 
-## BirdNET.selection.txt files.
-
-PROCESSED=${PROCESSED}
-
-## EXTRACTED is the directory where the extracted audio selections are moved.
-
-EXTRACTED=${EXTRACTED}
-
-## IDFILE is the file that keeps a complete list of every spececies that
-## BirdNET has identified from your data-set. It is persistent across
-## data-sets, so would need to be whiped clean through deleting or renaming
-## it. A backup is automatically made from this variable each time it is 
-## updated (structure: ${IDFILE}.bak), and would also need to be removed
-## or renamed to start a new file between data-sets. Alternately, you can
-## change this variable between data-sets to preserve records of disparate
-## data-sets according to name.
-
-IDFILE=${IDFILE}
-
-## OVERLAP is the value in seconds which BirdNET should use when analyzing
-## the data. The values must be between 0.0-2.9.
-
-OVERLAP=${OVERLAP}
-
-## CONFIDENCE is the minimum confidence level from 0.0-1.0 BirdNET's analysis 
-## should reach before creating an entry in the BirdNET.selection.txt file.
-## Don't set this to 1.0 or you won't have any results.
-
-CONFIDENCE=${CONFIDENCE}
-
-## SENSITIVITY is the detection sensitivity from 0.5-1.5.
-
-SENSITIVITY=${SENSITIVITY}
-
-## CHANNELS holds the variabel that corresponds to the number of channels the
-## sound card supports.
-
-CHANNELS=${CHANNELS}
-
-## FULL_DISK can be set to configure how the system reacts to a full disk
-## purge = Remove the oldest day's worth of recordings
-## keep = Keep all data and 'stop_core_services.sh'
-
-FULL_DISK=purge
-
-## VENV is the virtual environment where the the BirdNET python build is found,
-## i.e, VENV is the virtual environment miniforge built for BirdNET.
-
-VENV=/home/pi/BirdNET-Pi/birdnet
-
-## RECORDING_LENGTH sets the length of the recording that BirdNET-Lite will analyze.
-RECORDING_LENGTH=${RECORDING_LENGTH}
-
-## EXTRACTION_LENGTH sets the length of the audio extractions that will be made
-## from each BirdNET-Lite detection.
-EXTRACTION_LENGTH=${EXTRACTION_LENGTH}
-
-## BIRDNET_USER should be the non-root user systemd should use to execute each 
-## service.
-
-BIRDNET_USER=pi
-
-## These are just for debugging
-LAST_RUN=${LAST_RUN}
-THIS_RUN=${THIS_RUN}
 EOF
 }
 
-# Checks for a birdnet.conf file in the BirdNET-Pi directory for a 
-# non-interactive installation. Otherwise,the installation is interactive.
+# Checks for a birdnet.conf file 
 if [ -f ${BIRDNET_CONF} ];then
   source ${BIRDNET_CONF}
   chmod g+w ${BIRDNET_CONF}
-  sed -i "s/LATITUDE=.*/LATITUDE=${LATITUDE}/g" ${BIRDNET_CONF}
-  sed -i "s/LONGITUDE=.*/LONGITUDE=${LONGITUDE}/g" ${BIRDNET_CONF}
-  sed -i "s/DB_PWD=.*/DB_PWD=${DB_PWD}/g" ${BIRDNET_CONF}
-  #install_birdnet_conf
   [ -d /etc/birdnet ] || sudo mkdir /etc/birdnet
   sudo ln -sf $(dirname ${my_dir})/birdnet.conf /etc/birdnet/birdnet.conf
   grep -ve '^#' -e '^$' /etc/birdnet/birdnet.conf > ${birdnetpi_dir}/firstrun.ini
 else
-  configure
-  install_birdnet_conf
-  chmod g+w ${BIRDNET_CONF}
-  [ -d /etc/birdnet ] || sudo mkdir /etc/birdnet
-  sudo ln -sf $(dirname ${my_dir})/birdnet.conf /etc/birdnet/birdnet.conf
-  grep -ve '^#' -e '^$' /etc/birdnet/birdnet.conf > ${birdnetpi_dir}/firstrun.ini
+  echo "No birdnet.conf"; exit 1
 fi